Additional requirements for specific tests

For certain tests in the Vienna Test System, additional requirements must be met to ensure the test functions correctly. These additional requirements may include:

• The use of certain peripheral devices (hardware sold by SCHUHFRIED to administer the tests)

• Specific requirements for your PC (e. g. regarding screen size)

• Installation of the VTS Testplayer Client on the PC that is used for the testing

Please find below the tests and the additional requirements that must be met for each.

Use of peripheral devices

• The tests COG, DT, INHIB, PP-R, RT, SIGNAL, STROOP, SWITCH, VIGIL, WAF, WAFV, ZBA require any Response Panel (Ag Panel or Ug Panel).

• The test sets CFADHD, CFD, CFSD, COGBAT, DRIVE-FR, DRIVE-PL, DRIVEPLS, DRIVESC, DRIVESTA, FEV, SAAIR, SARAIL, SAROAD, SFTEAM, SLEEP, TATEENS2 require any Response Panel (Ag Panel or Ug Panel).

• The tests 2HAND and SMK require the Universal Response Panel (Ug Panel). Please note: The test forms S4 and S5 of the 2HAND can also be administered with the Advanced Response Panel (Ag Panel).

• The test PP-R requires also the Peripheral Perception Unit 2 (PP-HW2) hardware.

• The test MLS requires the MLS Work Panel.

Specific requirements for your PC

• If you conduct tests in a browser it is required that the browser can run in full screen mode. Please make sure that your system allows this.

• WAF, WAFA and CFD can also be presented using a touchscreen. The use of a capacitive touchscreen is required.

• For the PP-R test the screen size should not be larger than 22".

• The WG test requires a screen size larger than 16''.

Installation of the VTS Testplayer Client

Some tests require that the VTS Testplayer Client is installed on the PC that is used for the testing. Those tests can not be started without installation of the VTS Testplayer. This also applies if you are using VTS online.

For the VTS Testplayer Client the system requirements stated under Clients in the Server/Client section of the System requirements must be met.

The following tests require the installation of the VTS Testplayer Client:

• The tests: COG, DT, INHIB, PP-R, RT, SIGNAL, STROOP, SWITCH, VIGIL, WAF, WFV, ZBA, 2HAND, SMK, MLS, ATAVT, SMART (test form S1 only), 2D, 3D, COMPRO, BACO, GET, 5POINT, AWLT, LEVE, WIWO, WOBT, VISCO, GECO, WG, PAD, TOM, VIP, WRST/S1 & S2, LAMBDA-2

• The test-sets: CFADHD, CFD, CFSD, COGBAT, DRIVE-FR, DRIVE-PL, DRIVEPLS, DRIVESC, DRIVESTA, FEV, SAAIR, SARAIL, SAROAD, SFTEAM, SLEEP, TATEENS2